|
|
The SV Series uses a serial port to interface with RJS ScanVision, a PC based software package used for set-up and monitoring. Use ScanVision for SV setup while the scanner/verifier is off line and/or use it for real-time bar code quality analysis while the scanner/verifier is operating. The unit also incorporates Model SV download language for setup without RJS ScanVision.
Five hardware outputs are available via an I/O-Power port for logic operation such as No Read, Poor Quality, Good Quality or Good Read status. Two synchronization inputs are also available for robust No Read evaluations. Two LED’s are available for status indications.
The serial port can also be used without ScanVision to provide decoded data and/or bar code analysis information to a host system.
|
|
|
RJS MODEL SV SERIES SYSTEM DESCRIPTION
and TECHNICAL DATA
SV Series Model Specifications*
|
|
SV100
|
SV100HD
|
SV100C
|
SV200-1
|
SV200-2
|
|
Analyses/sec
|
100
|
100
|
100
|
200
|
200
|
|
Beam Width
|
6" (152mm)
|
4.5" (114mm)
|
10.5" (267mm)
|
2.5" (63.5mm)
|
1.75" (44mm)
|
|
Focus Distance
|
8" (203 mm)
|
6" (152mm)
|
15" (381mm)
|
8" (203mm)
|
6" (152mm)
|
|
X dim (min)
|
.0067" (.17mm)
|
.005" (.127mm)
|
.013" (.33mm)
|
.0067" (.17mm)
|
.005" (.127mm)
|
* Contact RJS Technical Support for information on custom and other models
Accessories and Options
Universal Power Supply Unit, RJS ScanVision Software, Female DB-9 to Female DB-9 Communication Cable (6 ft. (1.8 M) length), Calibration Symbol, Mounting Stand, Rastering Scan Line, Interface Kits for Zebra and Sato Printers (contact RJS for additional printer types), Power Supply/Sensor/Output Cable.
Data and Quality Parameters Available**
Decoded Data, All Symbol Characters, Modulo Check Digit Analysis, Symbology Type, ANSI Method Overall Symbol Grade, ANSI Method Parameter Grades, (Reference Decode, Decodability, Modulation, Symbol Contrast, Rmin/Rmax, Defects, Min. Edge Contrast and Global Threshold), Average Bar Deviation, Ratio (if applicable), PCS, Element Reflectance (min. and max.), Quiet Zone Analysis, X Dimension, Inter-Character Gap (if applicable), No Read Flag, % decode, Partial Read Analysis, Pass/Fail Flag, Data Match (up to ten (10) fields), Increment/Decrement (base 10 and base 36). ** Note: 1. All reflectance parameters require calibration, fixed
scanning distance and fixed angle of scan 2. X dimension requires fixed scanning distance
Symbologies
USS Code 39, USS Code 128, USS Code 93, USS Codabar, USS Interleaved 2 of 5, UPC / EAN including 2 and 5 digit supplemental codes
(Contact RJS for special symbology applications.)
Scanning Performance
Depth of Field – Mount at specified focus distance for most accurate verification operation.
Ladder or Picket Fence Bar Codes
Up to four (4) bar codes across
Operation Modes
Sync (edge and envelope), Freescan and ScanVision off line modes can be enabled
Physical
Package: 4.4" (112 mm) x 2.4" (61 mm) x 5.2" (132 mm)
Indications: Five (5) LED’s – Power/Sync, Calibration, Read, two (2) programmable LED’s
Comm Port: DB-9 male, RS 232C, programmable baud rate up to 115200 baud
I/O-Power: DB-15 male, five (5) programmable outputs, two (2) sync inputs
+5VDC @ 1 amp required
Mounting: Two (2) sets of mounting holes on two (2) different surfaces or a clamp for tightening to a 3/8" (9.5 mm) rod.
Data Sheet provided by RJS Inc.
|
